ZRT tilted single axis solar tracking system has one tilted axis (10°– 30° tilted) tracking the azimuth angle of the sun. It is mainly suitable for medium and high latitude regions. Each set mounting 10 - 20 pieces of solar panels, increase your power generation by about 15% - 25%
We use three point supports for the structure to make it more stable and has better wind resistance performance, no shaking clearance on driving system and rotation parts. The rotation parts using UPE material solar bearing with 4.5 million molecular weight, good wear resistance and aging resistance, self-lubricating, 25 years without maintenance.
No professional maintenance personnel are required, in case of equipment problems, the spare parts can be replaced directly in very short time on site.
We can provide two driving options and flexibly adjust the solution for different projects. IP65 protection grade for electronic parts, double layer protection for core components, it can be applied in desert projects and water projects.
The structure using hot-dipped galvanized steel or new type galvanized aluminum magnesium with high strength and good corrosion resistance, it can be installed in coastal areas.
More than 6000 sets of ZRT series tiled single axis solar tracker have been installed and used in public utilities projects, industrial and commercial projects, solar water pump projects and household projects all over the world.
| Control mode |
Time + GPS |
| System type |
Independent drive / 2-3 rows linked |
| Average tracking accuracy |
0.1°- 2.0°(adjustable) |
| Gear motor |
24V/1.5A |
| Output torque |
5000 N·M |
| Tracking power consumption |
0.01kwh/day |
| Azimuth angle tracking range |
±50° |
| Elevation tilted angle |
10° - 30° |
| Max. wind resistance in horizontal |
40 m/s |
| Max. wind resistance in operation |
24 m/s |
| Material |
Hot-dipped galvanized≥65μm |
| System warranty |
3 years |
| Working temperature |
-40℃ — +75℃ |
| Weight per set |
160KGS - 350KGS |
| Total power per set |
4kW - 20kW |